FFT-based selective harmonic current control of AC filter capacitors for audible noise analysis

J. Han (1) , S. Sun (1) , S. Zheng (1) , Y. Gao (1) , Yide Wang (2) , T. Tang (1)

1 Shanghai Maritime University
2 IETR - Institut d'Électronique et des Technologies du numéRique

With the development of High Voltage Direct Current (HVDC) and ultra HVDC, a growing number of high voltage film filter capacitors have been installed for harmonic suppression. But the capacitors generate severe audible noise in the converters, which has become more and more serious. Then it is important to imitate the practical working situation of capacitors for the research of noise characteristics to improve the capacitive performance in lab. In this paper, a FFT-based harmonic current control method is proposed for audible noise analysis of AC filter capacitor. Firstly, mathematical model of the Harmonic Current Injection System (HCIS) is built based on MATLAB. Then a Fast Fourier Transform (FFT) harmonics detection method is analyzed and used to detect the amplitude and phase of each harmonic considering a number of harmonic currents flowing through AC filter capacitors. Since the amplitude and phase spectrum of capacitor current are obtained, the Proportional Integral (PI) regulator is applied to adjust the specified harmonic amplitude to achieve zero-error control. Then accurate harmonic current can be injected to the tested capacitor and it will help to acquire the noise characteristics of the tested plant. At last, the simulation and experimental results validate the proposed strategy. © The Author(s) 2021.

Mots clés: AC filter capacitors; current control; FFT algorithm; Harmonic detection

Domaines: Sciences de l'ingénieur [physics]

J. Han, S. Sun, S. Zheng, Y. Gao, Yide Wang, et al.. FFT-based selective harmonic current control of AC filter capacitors for audible noise analysis. Measurement and Control (United Kingdom), 2021, 54 (3-4), pp.408-416. ⟨10.1177/00202940211000078⟩. ⟨hal-03195867⟩