Shaping of geopolymer composites by 3D printing - Axe 3 : organisation structurale multiéchelle des matériaux Accéder directement au contenu
Article Dans Une Revue Journal of Building Engineering Année : 2021

Shaping of geopolymer composites by 3D printing

Résumé

This work aims to shape a hollow cylinder with a geopolymer and an additive manufacturing process (3D printing) without organic additives. The formulation of a geopolymer composite using only mineral parts is proposed and the parameters of the 3D printing process were optimized. The mechanical properties, the microstructure, and the adhesion of the layers of the printing material were analysed and compared with the literature. The results showed that the geopolymer composite could be printed with the addition of small ratios of wollastonite, glass fibers, or non-reactive aluminosilicate and by modifying the printing speed. The stacking layers exhibited a good adhesion between them, avoiding the socalled "cold joints" effect, and the fibers are flow-oriented during the process. Some hollow cylinders are successfully printed with a flexural strength of 15 MPa.

Domaines

Matériaux
Fichier principal
Vignette du fichier
post print.pdf (1.41 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03146632 , version 1 (19-02-2021)

Identifiants

Citer

Julien Archez, Nathalie Texier-Mandoki, Xavier Bourbon, Jean-François F Caron, Sylvie Rossignol. Shaping of geopolymer composites by 3D printing. Journal of Building Engineering, 2021, 34, pp.101894. ⟨10.1016/j.jobe.2020.101894⟩. ⟨hal-03146632⟩
145 Consultations
146 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More