R. Gardon, Heat Transfer Between a Flat Plate and Jets of Air Impinging on It, Int. Dev. Heat Transfer (ASME), pp.454-460, 1962.

R. Gardon and J. C. Akfirat, The role of turbulence in determining the heat-transfer characteristics of impinging jets, International Journal of Heat and Mass Transfer, vol.8, issue.10, pp.1261-1272, 1965.
DOI : 10.1016/0017-9310(65)90054-2

R. Gardon and J. C. Akfirat, Heat Transfer Characteristics of Impinging Two-Dimensional Air Jets, Journal of Heat Transfer, vol.88, issue.1, pp.101-107, 1966.
DOI : 10.1115/1.3691449

C. O. Popiel and L. Boguslawski, Effect of Flow Structure on the heat or mass transfer on a Flat plate in Impinging Round jet, 2nd UK National Conf. on Heat Transfer, 1988.

J. Lee and S. J. Lee, The effect of nozzle configuration on stagnation region heat transfer enhancement of axisymmetric jet impingement, International Journal of Heat and Mass Transfer, vol.43, issue.18, pp.3497-3509, 2000.
DOI : 10.1016/S0017-9310(99)00349-X

K. Kataoka and T. Mizushina, Local enhancement of the rate of heat-transfer in an impinging round jet by free-stream turbulence, Proceedings of the Fifth International Conference, 1974.

D. Violato, A. Ianiro, G. Cardone, and F. Scarano, Three-dimensional vortex dynamics and convective heat transfer in circular and chevron impinging jets, International Journal of Heat and Fluid Flow, vol.37, pp.22-36, 2012.
DOI : 10.1016/j.ijheatfluidflow.2012.06.003

S. Roux, M. Fenot, G. Lalizel, L. E. Brizzi, and E. Dorignac, Experimental investigation of the flow and heat transfer of an impinging jet under acoustic excitation, International Journal of Heat and Mass Transfer, vol.54, issue.15-16, pp.54-3277, 2011.
DOI : 10.1016/j.ijheatmasstransfer.2011.03.059

D. Lytle and B. W. Webb, Air jet impingement heat transfer at low nozzle-plate spacings, International Journal of Heat and Mass Transfer, vol.37, issue.12, pp.1687-1697, 1994.
DOI : 10.1016/0017-9310(94)90059-0

M. Hadziabdic and K. Hanjalic, Vortical structures and heat transfer in a round impinging jet, Journal of Fluid Mechanics, issue.596, pp.221-260, 2008.

G. M. Carlomagno and A. Ianiro, Thermo-fluid-dynamics of submerged jets impinging at short nozzle-toplate distance: A review. Experimental thermal and fluid science Mass transfer between a plane surface and an impinging turbulent jet: the influence of surface-pressure fluctuations, Journal of Fluid Mechanics, vol.58, issue.119, pp.15-35, 1982.

S. V. Alekseenko and D. M. Markovich, Electrodiffusion diagnostics of wall shear stresses in impinging jets, Journal of Applied Electrochemistry, vol.9, issue.7, pp.626-631, 1994.
DOI : 10.1007/BF00252087

D. J. Phares, G. T. Smedley, and R. C. Flagan, The wall shear stress produced by the normal impingement of a jet on a flat surface, Journal of Fluid Mechanics, vol.418, issue.418, pp.351-375, 2000.
DOI : 10.1017/S002211200000121X

M. J. Tummers, J. Jacobse, and S. G. Voorbrood, Turbulent flow in the near field of a round impinging jet, International Journal of Heat and Mass Transfer, vol.54, issue.23-24, pp.54-4939, 2011.
DOI : 10.1016/j.ijheatmasstransfer.2011.07.007

E. A. Vallis, M. A. Patrick, and A. A. Wragg, Techniques of wall measurements in fluid mechanics Mass Transfer to an Impinging Jet Electrode, Euromech.90, pp.125-1461, 1977.

M. El-hassan, H. Hassan-assoum, V. Sobolik, J. Vétel, K. Abed-meraim et al., Experimental investigation of the wall shear stress and the vortex dynamics in a circular impinging jet, Experiments in Fluids, vol.123, issue.1, pp.52-1475, 2012.
DOI : 10.1007/s00348-012-1269-5

J. W. Hall and D. Ewing, On the dynamics of the large-scale structures in round impinging jets, Journal of Fluid Mechanics, vol.555, pp.439-458, 2006.
DOI : 10.1017/S0022112006009323

M. Kristiawan, A. Meslem, I. Nastase, and V. Sobolik, Wall shear rates and mass transfer in impinging jets: Comparison of circular convergent and cross-shaped orifice nozzles, International Journal of Heat and Mass Transfer, vol.55, issue.1-3, pp.282-293, 2012.
DOI : 10.1016/j.ijheatmasstransfer.2011.09.014
URL : https://hal.archives-ouvertes.fr/hal-01191452

A. Meslem, V. Sobolik, F. Bode, K. Sodjavi, Y. Zaouali et al., Flow dynamics and mass transfer in impinging circular jet at low Reynolds number. Comparison of convergent and orifice nozzles, International Journal of Heat and Mass Transfer, vol.67, issue.0, pp.67-92, 2013.
DOI : 10.1016/j.ijheatmasstransfer.2013.07.096

Z. Bolashikov, A. Melikov, M. Spilak, I. Nastase, and A. Meslem, Improved inhaled air quality at reduced ventilation rate by control of airflow interaction at the breathing zone with lobed jets, HVAC&R Research, vol.100, issue.2, pp.238-250, 2013.
DOI : 10.1111/j.1600-0668.2004.00304.x

N. Rajaratnam, C. C. Landreth, and R. J. Adrian, Turbulent jets Impingement of a low Reynolds number turbulent circular jet onto a flat plate at normal incidence, Experiments in Fluids, issue.9, pp.74-84, 1976.

F. Scarano, L. Riethmuller, M. , J. Adrian, and R. , Advances in iterative multigrid PIV image processing, Experiments in Fluids, vol.29, issue.7, pp.51-60, 2000.
DOI : 10.1007/s003480070007

R. Hain, C. Kähler, and D. Michaelis, Tomographic and time resolved PIV measurements on a finite cylinder mounted on a flat plate, Experiments in Fluids, vol.39, issue.4, pp.715-724, 2008.
DOI : 10.1007/s00348-008-0553-x

B. Wieneke, Volume self-calibration for 3D particle image velocimetry, Experiments in Fluids, vol.8, issue.4, pp.549-556, 2008.
DOI : 10.1007/s00348-008-0521-5

P. J. Schmid, D. Violato, and F. Scarano, Decomposition of time-resolved tomographic PIV, Experiments in Fluids, vol.45, issue.6, pp.1567-1579, 2012.
DOI : 10.1007/s00348-012-1266-8
URL : https://hal.archives-ouvertes.fr/hal-00994473

G. E. Elsinga, F. Scarano, B. Wieneke, and B. W. Van-oudheusden, Tomographic particle image velocimetry, Experiments in Fluids, vol.28, issue.7, pp.41-933, 2006.
DOI : 10.1007/s00348-006-0212-z

C. Atkinson, S. Coudert, J. Foucaut, M. Stanislas, and J. Soria, The accuracy of tomographic particle image velocimetry for measurements of a turbulent boundary layer, Experiments in Fluids, vol.45, issue.5, pp.1031-1056, 2011.
DOI : 10.1007/s00348-010-1004-z
URL : https://hal.archives-ouvertes.fr/hal-00591043

A. Buchner, N. Buchmann, K. Kilany, C. Atkinson, and J. Soria, Stereoscopic and tomographic PIV of a pitching plate, Experiments in Fluids, vol.28, issue.6, pp.299-314, 2012.
DOI : 10.1007/s00348-011-1218-8

L. P. Reiss and T. J. Hanratty, Measurement of instantaneous rates of mass transfer to a small sink on a wall, AIChE Journal, vol.8, issue.2, pp.245-247, 1962.
DOI : 10.1002/aic.690080223

V. Sobolik, O. Wein, and J. Cermak, Simultaneous measurement of film thickness and wall shear stress in wavy flow of non-Newtonian liquids, Collection of Czechoslovak Chemical Communications, vol.52, issue.4, pp.913-928, 1987.
DOI : 10.1135/cccc19870913

V. Sobolik, J. Tihon, O. Wein, and K. Wichterle, Calibration of electrodiffusion friction probes using a voltage-step transient, Journal of Applied Electrochemistry, vol.28, issue.3, pp.329-335, 1998.
DOI : 10.1023/A:1003224018571

W. Schabel and H. Martin, G10 Impinging jet Flow Heat Transfer, In VDI Heat Atlas, pp.745-752, 2010.

L. F. Geers, M. J. Tummers, T. J. Bueninck, and K. Hanjali, Heat transfer correlation for hexagonal and in-line arrays of impinging jets, International Journal of Heat and Mass Transfer, vol.51, issue.21-22, pp.51-72, 2008.
DOI : 10.1016/j.ijheatmasstransfer.2008.01.035

A. Sengupta and P. P. Sarkar, Experimental measurement and numerical simulation of an impinging jet with application to thunderstorm microburst winds, Journal of Wind Engineering and Industrial Aerodynamics, vol.96, issue.3, pp.96-345, 2008.
DOI : 10.1016/j.jweia.2007.09.001

Z. Xu and H. Hangan, Scale, boundary and inlet condition effects on impinging jets, Journal of Wind Engineering and Industrial Aerodynamics, vol.96, issue.12, pp.96-2383, 2008.
DOI : 10.1016/j.jweia.2008.04.002

E. J. Gutmark and C. M. Ho, Preferred modes and the spreading rates of jets, Physics of Fluids, vol.26, issue.10, pp.2932-2938, 1983.
DOI : 10.1063/1.864058

Z. D. Husain and A. K. Hussain, Natural instability of free shear layers, AIAA Journal, vol.21, issue.11, pp.1512-1517, 1983.
DOI : 10.2514/3.8282

K. B. Zaman and A. K. Hussain, Vortex pairing in a circular jet under controlled excitation. Part 1. General jet response, Journal of Fluid Mechanics, vol.87, issue.03, 1980.
DOI : 10.1063/1.862349

C. G. Ball, H. Fellouah, and A. Pollard, The flow field in turbulent round free jets, Progress in Aerospace Sciences, pp.1-26, 2012.
DOI : 10.1016/j.paerosci.2011.10.002

J. Jeong and F. Hussain, On the identification of a vortex Visualization of a free and impinging round jet. Experimental Thermal and Fluid Science, Journal of Fluid Mechanics, vol.285, issue.4, pp.253-264, 1991.

S. V. Alekseenko, D. M. Markovich, and V. I. Semenov, Turbulent Structure of a Gas-Liquid Impinging Jet. Fluid Dynamics, pp.684-694, 2002.

M. J. Tummers, J. Jacobse, and S. G. Voorbrood, Turbulent flow in the near field of a round impinging jet, International Journal of Heat and Mass Transfer, vol.54, issue.23-24, pp.54-77, 2011.
DOI : 10.1016/j.ijheatmasstransfer.2011.07.007

J. Vejrazka, J. Tihon, P. Marty, and V. Sobolík, Effect of an external excitation on the flow structure in a circular impinging jet, Physics of Fluids, vol.17, issue.10, p.17, 1994.
DOI : 10.1063/1.2084207

J. Lee and S. Lee, The effect of nozzle aspect ratio on stagnation region heat transfer characteristics of elliptic impinging jet, International Journal of Heat and Mass Transfer, vol.43, issue.4, pp.555-575, 2000.
DOI : 10.1016/S0017-9310(99)00167-2

W. Colucci, D. , and R. Viskanta, Effect of nozzle geometry on local convective heat transfer to a confined impinging air jet. Experimental Thermal and Fluid Science, pp.71-80, 1996.

T. Dairay, V. Fortuné, E. Lamballais, and L. Brizzi, Direct numerical simulation of a turbulent jet impinging on a heated wall, Journal of Fluid Mechanics, vol.99, pp.362-394, 2015.
DOI : 10.1016/S0017-9310(05)80204-2

C. O. Popiel and L. Boguslawski, Mass or heat transfer in impinging single, round jets emitted by a bellshaped nozzle and sharp-ended orifice Stagnation point heat transfer for jet impingement to a plane surface, International Heat Transfer Conference 8, pp.21-1214, 1983.