M. Haldimann, A. Luible, and M. Overend, Structural Use of Glass. Structural Engineering Documents, Zurich: International Association for Bridge and Structural Engineering, 2008.

F. Knoll and T. Vogel, Design for Robustness. Structural Engineering Documents, Zurich: International Association for Bridge and Structural Engineering, 2009.

A. Fam and S. Rizkalla, Structural performance of laminated and unlaminated tempered glass under monotonic transverse loading, Construction and Building Materials, vol.20, issue.9, pp.761-768, 2006.
DOI : 10.1016/j.conbuildmat.2005.01.051

C. Louter, J. Belis, F. Bos, and F. Veer, Experimental investigation of the temperature effect on the structural response of SG-laminated reinforced glass beams, Engineering Structures, vol.32, issue.6, pp.1590-1600, 2010.
DOI : 10.1016/j.engstruct.2010.02.007

C. Louter, J. Belis, F. Veer, and J. Lebet, Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size, Engineering Structures, vol.36, pp.292-301, 2012.
DOI : 10.1016/j.engstruct.2011.12.016

M. Z. Asik and S. Tezcan, A mathematical model for the behavior of laminated glass beams, Computers and Structures, vol.83, pp.21-221742, 2005.

L. Galuppi and G. Royer-carfagni, The effective thickness of laminated glass: Inconsistency of the formulation in a proposal of EN-standards, Composites Part B: Engineering, vol.55, pp.109-118, 2013.
DOI : 10.1016/j.compositesb.2013.05.025

I. Ivanov, Analysis, modelling, and optimization of laminated glasses as plane beam, International Journal of Solids and Structures, vol.43, issue.22-23
DOI : 10.1016/j.ijsolstr.2006.02.014

P. Foraboschi, Behavior and Failure Strength of Laminated Glass Beams, Journal of Engineering Mechanics, vol.133, issue.12, pp.1290-1301, 2007.
DOI : 10.1061/(ASCE)0733-9399(2007)133:12(1290)

P. Foraboschi, Analytical model for laminated-glass plate, Composites Part B: Engineering, vol.43, issue.5, pp.2094-2106, 2012.
DOI : 10.1016/j.compositesb.2012.03.010

L. Galuppi, G. Manara, and G. R. Carfagni, Practical expressions for the design of laminated glass, Composites Part B: Engineering, vol.45, issue.1, pp.1677-1688, 2013.
DOI : 10.1016/j.compositesb.2012.09.073

M. Fröling and K. Persson, Computational Methods for Laminated Glass, Journal of Engineering Mechanics, vol.139, issue.7, pp.780-790, 2013.
DOI : 10.1061/(ASCE)EM.1943-7889.0000527

S. T. Smith and J. G. Teng, Interfacial stresses in plated beams, Engineering Structures, vol.23, issue.7, pp.857-871, 2001.
DOI : 10.1016/S0141-0296(00)00090-0

A. Tounsi and S. Benyoucef, Interfacial stresses in externally FRP-plated concrete beams, International Journal of Adhesion and Adhesives, vol.27, issue.3, pp.207-215, 2007.
DOI : 10.1016/j.ijadhadh.2006.01.009

K. T. Lau, P. K. Dutta, L. M. Zhou, and D. Hui, Mechanics of bonds in an FRP bonded concrete beam, Composites Part B: Engineering, vol.32, issue.6, pp.491-502, 2001.
DOI : 10.1016/S1359-8368(01)00032-4

M. Y. Tsai, D. W. Oplinger, and J. Morton, Improved theoretical solutions for adhesive lap joints, International Journal of Solids and Structures, vol.35, issue.12, pp.1163-1185, 1998.
DOI : 10.1016/S0020-7683(97)00097-8

A. Tounsi, Improved theoretical solution for interfacial stresses in concrete beams strengthened with FRP plate, International Journal of Solids and Structures, vol.43, pp.4154-4174, 2006.

B. Krour, A. Tounsi, S. Benyoucef, A. Bedia, and E. A. , An improved closed-form solution to interfacial stresses in rc beams strengthened with a composite plate, Mechanics of Composite Materials, vol.29, issue.12, pp.46331-340, 2010.
DOI : 10.1007/s11029-010-9150-1

O. Rabinovitch and Y. Frostig, High-Order Approach for the Control of Edge Stresses in RC Beams Strengthened with FRP Strips, Journal of Structural Engineering, vol.127, issue.7, 2001.
DOI : 10.1061/(ASCE)0733-9445(2001)127:7(799)

A. Tounsi, H. Daouadji, S. Benyoucef, A. Bedia, and E. A. , Interfacial stresses in FRP-plated RC beams: Effect of adherend shear deformations, International Journal of Adhesion and Adhesives, vol.29, issue.4, pp.343-351, 2009.
DOI : 10.1016/j.ijadhadh.2008.06.008

F. Bernard, B. Krour, S. Benyoucef, and B. Fahsi, Development of a coupled analyticalnumerical procedure to determine the redundancy of a laminated glass structure, Proceedings of the COST Structural Glass Conference. Pore? (Croatia), pp.391-403, 2013.

J. Belis, J. Depauw, D. Callewaert, and D. Delincé, Failure mechanisms and residual capacity of annealed glass/SGP laminated beams at room temperature, Engineering Failure Analysis, vol.16, issue.6, pp.1866-1875, 2009.
DOI : 10.1016/j.engfailanal.2008.09.023

M. Overend, S. Nhamoinesu, and J. Watson, Structural Performance of Bolted Connections and Adhesively Bonded Joints in Glass Structures, Journal of Structural Engineering, vol.139, issue.12, 2013.
DOI : 10.1061/(ASCE)ST.1943-541X.0000748

Y. Sha, C. Y. Hui, E. J. Kramer, P. D. Garrett, and J. W. Knapczyk, Analysis of adhesion and interface debonding in laminated safety glass, Journal of Adhesion Science and Technology, vol.28, issue.1, pp.49-63, 1997.
DOI : 10.1163/156856197X01010

M. L. Williams, Stress singularities resulting from various boundary conditions in angular corners of plates in extension, Journal of Applied Mechanics, vol.19, pp.526-528, 1952.

M. L. Williams, The stresses around a fault or crack in dissimilar media, Bulletin of the Seismological Society of America, vol.49, pp.199-204, 1952.

R. D. Adams and N. A. Peppiatt, Effect of poisson's ratio strains in adherends on stresses of an idealized lap joint, Journal of Strain Analysis, vol.8, issue.2, pp.134-139, 1973.
DOI : 10.1243/03093247V082134

R. D. Adams and R. Davies, Strength of Joints Involving Composites, The Journal of Adhesion, vol.20, issue.1-4, pp.171-182, 1996.
DOI : 10.1016/0143-7496(87)90092-3

J. P. Gonçalves, M. F. De-moura, and P. M. De-castro, A three-dimensional finite element model for stress analysis of adhesive joints, International Journal of Adhesion and Adhesives, vol.22, issue.5, pp.357-365, 2002.
DOI : 10.1016/S0143-7496(02)00015-5

R. D. Adams, J. Comyn, and W. C. Wake, Structural Adhesive Joints in Engineering, 1997.
DOI : 10.1007/978-94-009-5616-2

R. D. Adams and R. Davies, Strength of lap shear joints, in The Mechanics of Adhesion, A.V. Pocius, 2002.

L. Zhang and J. Teng, Finite element prediction of interfacial stresses in structural members bonded with a thin plate, Engineering Structures, vol.32, issue.2, pp.459-471, 2010.
DOI : 10.1016/j.engstruct.2009.10.008

B. Krour, F. Bernard, and A. Tounsi, Fibers orientation optimization for concrete beam strengthened with a CFRP bonded plate: A coupled analytical???numerical investigation, Engineering Structures, vol.56, pp.218-227, 2013.
DOI : 10.1016/j.engstruct.2013.05.008
URL : https://hal.archives-ouvertes.fr/hal-00839542

B. Krour, Méthode améliorée pour la réduction des contraintes de décollement dans les poutres en béton armé renforcées par des plaques en composites, 2012.

C. Louter and J. H. Nielsen, Numerical analyses of the effect of SG-interlayer shear stiffness on the structural performance of reinforced glass beams, Proceedings of the COST Structural Glass Conference. Pore? (Croatia), pp.405-412, 2013.
DOI : 10.1201/b14563-55

A. Hillerborg, M. Modeer, and P. E. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, vol.6, issue.6, pp.773-782, 1976.
DOI : 10.1016/0008-8846(76)90007-7

M. Timmel, S. Kolling, and P. Osterrieder, A finite element model for impact simulation with laminated glass, International Journal of Impact Engineering, vol.34, issue.8, pp.1465-1478, 2007.
DOI : 10.1016/j.ijimpeng.2006.07.008

F. Bernard, B. Fahsi, and B. Krour, How to model glass failure in load-bearing glass elements? A discussion based on analytical, numerical and experimental considerations, Proceedings of the Challenging Glass Conference 3. Delft, pp.405-417, 2012.

Z. Ouyang and G. Li, Nonlinear interface shear fracture of end notched flexure specimens, International Journal of Solids and Structures, vol.46, issue.13, pp.2659-2668, 2009.
DOI : 10.1016/j.ijsolstr.2009.02.011

L. Biolzi, S. Cattaneo, and G. Rosati, Progressive damage and fracture of laminated glass beams, Construction and Building Materials, vol.24, issue.4, pp.577-584, 2010.
DOI : 10.1016/j.conbuildmat.2009.09.007

D. Delincé, Experimental approaches for assessing time and temperature dependent performances of fractured laminated safety glass, 2014.

F. Bernard, B. Krour, S. Benyoucef, and . Fahsib, Numerical analysis of the debonding of the adhesive interlayer in a laminated glass plate, Proceedings of the Challenging Glass 4 & COST TU 0905 final conference. Lausanne (Switzerland), pp.491-497, 2014.
DOI : 10.1201/b16499-71

S. Lim and F. Bernard, Parametric Study of Bonded Connection in Composite Tructures through the FE Modeling of Push-Out Test, Procedia Engineering, vol.14, pp.1455-1462, 2011.
DOI : 10.1016/j.proeng.2011.07.183

J. H. Nielsen, J. F. Olesen, P. N. Poulsen, and H. Stang, Simulation of residual stresses at holes in tempered glass: a parametric study, Materials and Structures, vol.29, issue.9, pp.947-961, 2010.
DOI : 10.1617/s11527-009-9558-z

J. Schneider, Glass Strength in the Borehole Area of Annealed Float Glass and Tempered Float Glass, International Journal of Forming Processes, vol.7, issue.4, pp.157-167, 2007.
DOI : 10.3166/ijfp.7.523-541

F. Bernard, L. Daudeville, and R. Gy, Finite element computation of residual stresses near holes in tempered glass plates, Glass Technology, vol.43, pp.290-295, 2002.

L. Daudeville, F. Bernard, and R. Gy, Residual Stresses Near Holes in Tempered Glass Plates, Materials Science Forum, vol.404, issue.407
DOI : 10.4028/www.scientific.net/MSF.404-407.43