J. Merlet, Parallel Robots, 2006.
DOI : 10.1007/978-94-010-9587-7

URL : https://hal.archives-ouvertes.fr/lirmm-00127856

D. Stewart, A platform with six degrees of freedom, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), vol.180, issue.1965, pp.371-386, 1965.
DOI : 10.1243/PIME_PROC_1965_180_029_02

B. Zi, B. Duan, J. Du, and H. Bao, Dynamic modeling and active control of a cable-suspended parallel robot, Mechatronics, vol.18, issue.1, pp.1-12, 2008.
DOI : 10.1016/j.mechatronics.2007.09.004

P. Bosscher, R. L. Williams, and M. Tummino, A Concept for Rapidly-Deployable Cable Robot Search and Rescue Systems, Volume 7: 29th Mechanisms and Robotics Conference, Parts A and B, pp.589-598, 2005.
DOI : 10.1115/DETC2005-84324

J. Merlet, MARIONET, A Family of Modular Wire-Driven Parallel Robots, pp.53-61, 2010.
DOI : 10.1007/978-90-481-9262-5_6

S. Tadokoro, R. Verhoeven, M. Hiller, and T. Takamori, A portable parallel manipulator for search and rescue at large-scale urban earthquakes and an identification algorithm for the installation in unstructured environments, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289), pp.1222-1227, 1999.
DOI : 10.1109/IROS.1999.812846

Y. Mao and S. K. , Design of a Cable-Driven Arm Exoskeleton (CAREX) for Neural Rehabilitation, IEEE Transactions on Robotics, vol.28, issue.4, pp.922-931, 2012.
DOI : 10.1109/TRO.2012.2189496

G. Rosati, P. Gallina, S. Masiero, and A. Rossi, Design of a new 5 DOF wire-based robot for rehabilitation, Proceedings of the 9th IEEE International Conference on Rehabilitation Robotics, ICORR, pp.430-433, 2005.

P. Gallina and G. Rosati, Manipulability of a planar wire driven haptic device, Mechanism and Machine Theory, vol.37, issue.2, pp.215-228, 2002.
DOI : 10.1016/S0094-114X(01)00076-3

D. Surdilovic, J. Gmp, R. Bernhardt, and . String-man, STRING-MAN: Wire-robot technology for safe, flexible and human-friendly gait rehabilitation, 2007 IEEE 10th International Conference on Rehabilitation Robotics, pp.446-453, 2007.
DOI : 10.1109/ICORR.2007.4428463

C. Gosselin, Stiffness mapping for parallel manipulators, IEEE Transactions on Robotics and Automation, vol.6, issue.3, pp.377-382, 1990.
DOI : 10.1109/70.56657

S. Kawamura, W. Choe, S. Tanaka, and S. R. Pandian, Development of an ultrahigh speed robot FALCON using wire drive system, Proceedings of 1995 IEEE International Conference on Robotics and Automation, pp.215-220
DOI : 10.1109/ROBOT.1995.525288

S. Algermissen, R. Keimer, M. Rose, E. Breitbach, and H. P. Monner, Applied robust control for vibration suppression in parallel robots, Proceedings of the 22nd International Symposium on Automation and Robotics in Construction (ISARC), 2005.

R. Gexue, L. Qiuhai, H. Ning, N. Rendong, and P. Bo, On vibration control with Stewart parallel mechanism, Mechatronics, vol.14, issue.1, pp.1-13, 2004.
DOI : 10.1016/S0957-4158(02)00092-2

B. Kang and J. K. Mills, Vibration Control of a Planar Parallel Manipulator Using Piezoelectric Actuators, Journal of Intelligent and Robotic Systems, vol.67, issue.9, pp.51-70, 2005.
DOI : 10.2493/jjspe.67.1458

K. Kozak, I. Ebert-uphoff, and W. Singhose, Locally Linearized Dynamic Analysis of Parallel Manipulators and Application of Input Shaping to Reduce Vibrations, Journal of Mechanical Design, vol.126, issue.1, pp.156-168, 2004.
DOI : 10.1115/1.1640362

S. Mitsuta, E. Okawa, K. Seto, and H. Ito, Active Vibration Control of Structures Arranged in Parallel, JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing, vol.37, issue.3, pp.436-443, 1994.
DOI : 10.1299/jsmec1993.37.436

G. Piras, W. Cleghorn, and J. Mills, Dynamic finite-element analysis of a planar high-speed, high-precision parallel manipulator with flexible links, Mechanism and Machine Theory, vol.40, issue.7, pp.849-862, 2005.
DOI : 10.1016/j.mechmachtheory.2004.12.007

M. Rognant, E. Courteille, and P. Maurine, A Systematic Procedure for the Elastodynamic Modeling and Identification of Robot Manipulators, IEEE Transactions on Robotics, vol.26, issue.6, pp.1085-1093, 2010.
DOI : 10.1109/TRO.2010.2066910

URL : https://hal.archives-ouvertes.fr/hal-00755847

Y. Yun and Y. Li, Design and analysis of a novel 6-dof redundant actuated parallel robot with compliant hinges for high precision positioning, Nonlinear Dyn, pp.829-845, 2010.

X. Zhang, J. K. Mills, and W. L. Cleghorn, Vibration control of elastodynamic response of a 3-PRR flexible parallel manipulator using PZT transducers, Robotica, vol.214, issue.05, pp.655-665, 2008.
DOI : 10.1016/0022-460X(88)90245-3

X. Diao and O. Ma, Vibration analysis of cable-driven parallel manipulators, Multibody System Dynamics, vol.21, issue.5, pp.347-360, 2009.
DOI : 10.1007/s11044-008-9144-0

J. Du, H. Bao, C. Cui, and D. Yang, Dynamic analysis of cable-driven parallel manipulators with time-varying cable lengths, Finite Elements in Analysis and Design, vol.48, issue.1, pp.1392-1399, 2012.
DOI : 10.1016/j.finel.2011.08.012

J. Du, W. Ding, and H. Bao, Cable Vibration Analysis for Large Workspace Cable-Driven Parallel Manipulators, pp.437-449, 2013.
DOI : 10.1007/978-3-642-31988-4_27

O. Ma and X. Diao, Dynamics analysis of a cable-driven parallel manipulator for hardware-in-the-loop dynamic simulation, Proceedings of the IEEE/ ASME International Conference on Advanced Intelligent Mechatronics, pp.837-842, 2005.

A. F. Tang, Y. Li, L. F. Kong, and X. J. Cheng, Vibration Analysis of Tendon-Based Parallel Robot for Processing, Advanced Materials Research, vol.655, issue.657, pp.655-1086, 2013.
DOI : 10.4028/www.scientific.net/AMR.655-657.1086

X. Weber, L. Cuvillon, and J. Gangloff, Active vibration canceling of a cable-driven parallel robot using reaction wheels, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.2014-1724, 2014.
DOI : 10.1109/IROS.2014.6942787

H. Yuan, E. Courteille, and D. Deblaise, Static and dynamic stiffness analyses of cable-driven parallel robots with non-negligible cable mass and elasticity, Mechanism and Machine Theory, vol.85, pp.64-81, 2015.
DOI : 10.1016/j.mechmachtheory.2014.10.010

URL : https://hal.archives-ouvertes.fr/hal-01127965

J. Du and S. K. , Dynamic Modeling of Cable-Driven Parallel Manipulators With Distributed Mass Flexible Cables, Journal of Vibration and Acoustics, vol.137, issue.2, p.21020, 2015.
DOI : 10.1115/1.4029486

S. Kawamura, H. Kino, and C. Won, High-speed manipulation by using parallel wire-driven robots, Robotica, vol.18, issue.1, pp.13-21, 2000.
DOI : 10.1017/S0263574799002477

T. Bruckmann, C. Sturm, and W. Lalo, Wire robot suspension systems for wind tunnels, Wind Tunn, Exp. Fluid Dyn. Res, pp.29-50, 2010.

K. Kozak, Q. Zhou, and J. Wang, Static analysis of cable-driven manipulators with non-negligible cable mass, IEEE Transactions on Robotics, vol.22, issue.3, pp.425-433, 2006.
DOI : 10.1109/TRO.2006.870659

E. Ottaviano, V. Gattulli, and F. Potenza, Elasto-static model for point mass sagged cable-suspended robots, Adv. Robot Kinemat, pp.1-8, 2016.

D. Q. Nguyen, M. Gouttefarde, O. Company, and F. Pierrot, On the simplifications of cable model in static analysis of large dimension cable-driven parallel robots, Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp.928-934, 2013.
URL : https://hal.archives-ouvertes.fr/lirmm-01221398

J. Merlet, On the inverse kinematics of cable-driven parallel robots with up to 6 sagging cables, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp.4356-4361, 2015.
DOI : 10.1109/IROS.2015.7353995

URL : https://hal.archives-ouvertes.fr/hal-01259257

M. Nahon, Dynamics and control of a novel radio telescope antenna, Modeling and Simulation Technologies Conference and Exhibit, 1999.
DOI : 10.2514/3.62882

Y. Ni, J. Ko, and G. Zheng, DYNAMIC ANALYSIS OF LARGE-DIAMETER SAGGED CABLES TAKING INTO ACCOUNT FLEXURAL RIGIDITY, Journal of Sound and Vibration, vol.257, issue.2, pp.301-319, 2002.
DOI : 10.1006/jsvi.2002.5060

U. Starossek, Dynamic Stiffness Matrix of Sagging Cable, Journal of Engineering Mechanics, vol.117, issue.12, pp.2815-2828, 1991.
DOI : 10.1061/(ASCE)0733-9399(1991)117:12(2815)

URL : https://tubdok.tub.tuhh.de/bitstream/11420/303/1/Dynamic_stiffness_matrix_of_sagging_cable.pdf

J. Banerjee, Dynamic stiffness formulation for structural elements: A general approach, Computers & Structures, vol.63, issue.1, pp.101-103, 1997.
DOI : 10.1016/S0045-7949(96)00326-4

A. Leung, Dynamic stiffness method for exponentially varying harmonic excitation of continuous systems, Journal of Sound and Vibration, vol.98, issue.3, pp.337-347, 1985.
DOI : 10.1016/0022-460X(85)90280-9

T. Richards and Y. Leung, An accurate method in structural vibration analysis, Journal of Sound and Vibration, vol.55, issue.3, pp.363-376, 1977.
DOI : 10.1016/S0022-460X(77)80019-9

M. Gouttefarde, J. Collard, N. Riehl, and C. Baradat, Geometry Selection of a Redundantly Actuated Cable-Suspended Parallel Robot, IEEE Transactions on Robotics, vol.31, issue.2, pp.501-510, 2015.
DOI : 10.1109/TRO.2015.2400253

URL : https://hal.archives-ouvertes.fr/lirmm-01221397

J. Kim and S. P. Chang, Dynamic stiffness matrix of an inclined cable, Engineering Structures, vol.23, issue.12, pp.1614-1621, 2001.
DOI : 10.1016/S0141-0296(01)00044-X

R. J. Allemang, Experimental Modal Analysis for Vibrating Structures

U. Starossek, Boundary Induced Vibration and Dynamic Stiffness of a Sagging Cable, 1991.

H. M. Irvine, Free vibrations of inclined cables, J. Struct. Div, vol.104, issue.2, pp.343-347, 1978.

H. Yuan, E. Courteille, and D. Deblaise, Force Distribution With Pose-Dependent Force Boundaries for Redundantly Actuated Cable-Driven Parallel Robots, Journal of Mechanisms and Robotics, vol.8, issue.4, p.41004, 2016.
DOI : 10.1115/1.4032104

M. Miyasaka, M. Haghighipanah, Y. Li, and B. Hannaford, Hysteresis model of longitudinally loaded cable for cable driven robots and identification of the parameters, 2016 IEEE International Conference on Robotics and Automation (ICRA), pp.4051-4057, 2016.
DOI : 10.1109/ICRA.2016.7487596

V. Gattulli and M. Lepidi, Localization and veering in the dynamics of cable-stayed bridges, Computers & Structures, vol.85, issue.21-22, pp.1661-1678, 2007.
DOI : 10.1016/j.compstruc.2007.02.016

M. Lepidi and V. Gattulli, Non-linear interactions in the flexible multi-body dynamics of cable-supported bridge cross-sections, International Journal of Non-Linear Mechanics, vol.80, pp.14-28, 2016.
DOI : 10.1016/j.ijnonlinmec.2015.09.009