The forming region and mechanical properties of CaO-Al2O3-SiO2 system

Abstract : Glass system with compositions of 93.9% (xCaO-yAl2O3-zSiO2)−5% MgO-1% B2O3−0.1% Fe2O3 has been prepared by a conventional melt-quenching technique, and the glass forming region and the mechanical properties of the derived glasses were investigated. The approximate glass forming region was found to be x = 10~35%, y = 10~35% and z = 50~80%, while the rest of the area was crystallization zone or crack zone. As x = 10%, y = 25% and z = 65% (Sample 13), the investigated glass possesses the optimum volume density, bending strength, compression strength and modulus, which are 2.572 g/cm3, 74.05 MPa, 312.84 MPa and 163.96 GPa, respectively. Compared to sample 13, samples with different compositions have reduced the volume density, lowered the Raman intensity and improved the optical band gap. For the mechanical properties, with decreasing the contents of SiO2, the bending strength firstly increases, then decreases and finally shows a relatively small increasing trend. The dependence of compression strength and compression modulus on SiO2 content shows a similar trend to the bending strength. Moreover, the optical band gap and Raman spectrum of the sample 13 indicate that the number of oxygen bonds in the bridge reach the maximum, which could further confirm a significantly improvement on the mechanical properties. © 2017 Elsevier Ltd and Techna Group S.r.l.
Type de document :
Article dans une revue
Ceramics International, 2017, 43 (16), pp.13810-13816. 〈10.1016/j.ceramint.2017.07.101〉
Domaine :
Liste complète des métadonnées
Contributeur : Laurent Jonchère <>
Soumis le : jeudi 19 octobre 2017 - 13:39:26
Dernière modification le : samedi 22 décembre 2018 - 19:33:27



L. Huang, S. Xu, X. Zhang, Q. Zhu, H. Wang, et al.. The forming region and mechanical properties of CaO-Al2O3-SiO2 system. Ceramics International, 2017, 43 (16), pp.13810-13816. 〈10.1016/j.ceramint.2017.07.101〉. 〈hal-01619407〉



Consultations de la notice