J. Aubert, P. Maillard, J. Morel, A. Rafii, and M. , Towards a simple compressive strength test for earth bricks? Mater Struct 1?14, 2015.

G. Azeredo, J. Morel, and C. Lamarque, Applicability of rheometers to characterizing earth mortar behavior. Part I: experimental device and validation, Materials and Structures, vol.104, issue.5, pp.1465-1472, 2008.
DOI : 10.6028/jres.104.028

Q. Bui, J. Morel, S. Hans, and N. Meunier, Compression behaviour of non-industrial materials in civil engineering by three scale experiments: the case of rammed earth, Materials and Structures, vol.27, issue.3, pp.1101-1116, 2009.
DOI : 10.1617/s11527-008-9446-y

M. Moevus, Y. Jorand, and C. Olagnon, Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase, Materials and Structures, vol.256, issue.4, 2015.
DOI : 10.1006/jcis.2001.7941

URL : https://hal.archives-ouvertes.fr/hal-01159955

L. Gnanli, C. Ouellet-plamandon, C. Brumaud, and G. Habert, Development of a Self- Compacted Clay based Concrete, rheological, mechanical and environmental investigations, 2014.

C. Ouellet-plamondon, G. Landrou, and M. Palacios, Earth concrete as a promising building material, 2015.

G. Landrou, C. Brumaud, and G. Habert, Clay particles as binder for earth buildings materials: a fresh look into rheology of dense clay suspensions, EPJ Web of Conferences, vol.19, issue.148, p.13010, 2017.
DOI : 10.1122/1.550017

URL : https://www.epj-conferences.org/articles/epjconf/pdf/2017/09/epjconf162331.pdf

G. Landrou, C. Brumaud, and F. Winnefeld, Lime as an Anti-Plasticizer for Self-Compacting Clay Concrete, Materials, vol.27, issue.5, p.330, 2016.
DOI : 10.1038/2041050a0

URL : http://www.mdpi.com/1996-1944/9/5/330/pdf

C. Dove, F. Bradley, and S. Patwardhan, Seaweed biopolymers as additives for unfired clay bricks, Materials and Structures, vol.49, issue.11, pp.4463-4482, 2016.
DOI : 10.1046/j.1365-2389.1998.4940569.x

URL : http://eprints.gla.ac.uk/115069/7/115069.pdf

C. Galán-marín, C. Rivera-gómez, and J. Petric, Clay-based composite stabilized with natural polymer and fibre, Construction and Building Materials, vol.24, issue.8, pp.1462-1468, 2010.
DOI : 10.1016/j.conbuildmat.2010.01.008

M. Achenza and L. Fenu, On Earth Stabilization with Natural Polymers for Earth Masonry Construction, Materials and Structures, vol.39, issue.1, pp.21-27, 2006.
DOI : 10.1617/s11527-005-9000-0

H. Khelifi, T. Lecompte, A. Perrot, and G. Ausias, Mechanical enhancement of cementstabilized soil by flax fibre reinforcement and extrusion processing, Mater Struct, pp.1-14, 2015.
DOI : 10.1617/s11527-015-0564-z

H. Khelifi, A. Perrot, T. Lecompte, and G. Ausias, Design of clay/cement mixtures for extruded building products, Materials and Structures, vol.81, issue.3, pp.999-1010, 2013.
DOI : 10.1016/j.still.2004.04.002

URL : https://hal.archives-ouvertes.fr/hal-00985713

D. Maskell, A. Heath, and P. Walker, Laboratory scale testing of extruded earth masonry units, Materials & Design, vol.45, pp.359-364, 2013.
DOI : 10.1016/j.matdes.2012.09.008

URL : http://opus.bath.ac.uk/31868/5/Laboratory_Scale_Testing_of_Extruded_Earth_Masonry_Units.pdf

C. Ouellet-plamondon and G. Habert, Self-Compacted Clay based Concrete (SCCC): proof-of-concept, Journal of Cleaner Production, vol.117, pp.160-168, 2016.
DOI : 10.1016/j.jclepro.2015.12.048

A. Bruno, D. Gallipoli, C. Perlot, and J. Mendes, Mechanical behaviour of hypercompacted earth for building construction, Materials and Structures, vol.105, issue.1???2, pp.11527-11544, 2017.
DOI : 10.1016/j.conbuildmat.2015.12.189

B. Khoshnevis, Automated construction by contour crafting???related robotics and information technologies, Automation in Construction, vol.13, issue.1, pp.5-19, 2002.
DOI : 10.1016/j.autcon.2003.08.012

URL : http://craft.usc.edu/CC/Welcome_files/resources/AIC2004-Paper.pdf

B. Khoshnevis, D. Hwang, K. Yao, and Z. Yeh, Mega-scale fabrication by Contour Crafting, International Journal of Industrial and Systems Engineering, vol.1, issue.3, pp.301-320, 2006.
DOI : 10.1504/IJISE.2006.009791

URL : http://craft.usc.edu/CC/Welcome_files/resources/mega.pdf

T. Le, S. Austin, and S. Lim, Mix design and fresh properties for high-performance printing concrete, Materials and Structures, vol.31, issue.8, pp.1221-1232, 2012.
DOI : 10.1016/j.cemconcomp.2009.04.010

URL : https://dspace.lboro.ac.uk/dspace-jspui/bitstream/2134/10930/6/Mix%20design%20and%20fresh%20properties%20for%20HPPC_revised-1.pdf

S. Lim, R. Buswell, and T. Le, Developments in construction-scale additive manufacturing processes, Automation in Construction, vol.21, pp.262-268, 2012.
DOI : 10.1016/j.autcon.2011.06.010

URL : https://dspace.lboro.ac.uk/dspace-jspui/bitstream/2134/9176/5/Lim-et-al-developments-2012.pdf

A. Perrot, D. Rangeard, and A. Pierre, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Materials and Structures, vol.35, issue.9, pp.1213-1220, 2016.
DOI : 10.1016/j.cemconres.2004.09.007

URL : https://hal.archives-ouvertes.fr/hal-01166504

E. Lloret, A. Shahab, and M. Linus, Complex concrete structures, Computer-Aided Design, vol.60, pp.40-49, 2015.
DOI : 10.1016/j.cad.2014.02.011

T. Wangler, E. Lloret, and L. Reiter, Digital Concrete: Opportunities and Challenges, RILEM Technical Letters, vol.1, pp.2016-1021809, 2016.
DOI : 10.21809/rilemtechlett.2016.16

URL : https://doi.org/10.21809/rilemtechlett.2016.16

D. Lowke, D. Weger, and K. Henke,

T. Lecompte and A. Perrot, Non-linear modeling of yield stress increase due to SCC structural build-up at rest, Cement and Concrete Research, vol.92, pp.92-97, 2017.
DOI : 10.1016/j.cemconres.2016.11.020

URL : https://hal.archives-ouvertes.fr/hal-02008163

L. Mettler, F. Wittel, R. Flatt, and H. Herrmann, Evolution of strength and failure of SCC during early hydration, Cement and Concrete Research, vol.89, pp.288-296, 2016.
DOI : 10.1016/j.cemconres.2016.09.004

URL : http://arxiv.org/pdf/1609.02293

D. Lootens, P. Jousset, and L. Martinie, Yield stress during setting of cement pastes from penetration tests, Cement and Concrete Research, vol.39, issue.5, pp.401-408, 2009.
DOI : 10.1016/j.cemconres.2009.01.012

N. Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications, Cement and Concrete Research, vol.36, issue.10, pp.1797-1806, 2006.
DOI : 10.1016/j.cemconres.2006.05.025

K. Leuven, Additive manufacturing of ceramics: a review, J Ceram Sci Technol, vol.5, pp.245-260, 2014.

I. Paoletti, Mass Customization with Additive Manufacturing: New Perspectives for Multi Performative Building Components in Architecture, Procedia Engineering, vol.180, pp.1150-1159, 2017.
DOI : 10.1016/j.proeng.2017.04.275

J. Mohammed, Applications of 3D printing technologies in oceanography, Methods in Oceanography, vol.17, pp.97-117, 2016.
DOI : 10.1016/j.mio.2016.08.001

P. Del-olmo and M. , Additive manufacturing of non plastic porcelain material by direct writing and freeze casting, 2011.

A. Perrot, T. Lecompte, P. Estellé, and S. Amziane, Structural build-up of rigid fiber reinforced cement-based materials, Materials and Structures, vol.38, issue.7, pp.1561-1568, 2013.
DOI : 10.1016/j.cemconres.2008.03.011

URL : https://hal.archives-ouvertes.fr/hal-00770565

A. Perrot, D. Rangeard, and A. Levigneur, Linking rheological and geotechnical properties of kaolinite materials for earthen construction, Materials and Structures/Materiaux et Constructions, pp.4647-4655, 2016.
DOI : 10.1016/j.jcis.2012.04.029

URL : https://hal.archives-ouvertes.fr/hal-01374489

T. Funami, Y. Fang, and S. Noda, Rheological properties of sodium alginate in an aqueous system during gelation in relation to supermolecular structures and Ca2+ binding, Food Hydrocolloids, vol.23, issue.7, pp.1746-1755, 2009.
DOI : 10.1016/j.foodhyd.2009.02.014

R. Wolfs, F. Bos, and T. Salet, Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing, Cement and Concrete Research, vol.106, 2018.
DOI : 10.1016/j.cemconres.2018.02.001