S. H. Huang, P. Liu, A. Mokasdar, and L. Hou, Additive manufacturing and its societal impact: a literature review, Int. J. Adv. Manuf. Technol, vol.67, pp.1191-1203, 2013.

Y. Huang, M. C. Leu, J. Mazumder, and A. Donmez, Additive manufacturing: current state, future potential, gaps and needs, and recommendations, J. Manuf. Sci. Eng, vol.137, 2015.

B. Lu, D. Li, and X. Tian, Development trends in additive manufacturing and 3D printing. Engineering, vol.1, pp.85-89, 2015.

B. Mueller, Additive manufacturing technologies-Rapid prototyping to direct digital manufacturing, Assem. Autom, vol.32, 2012.

J. Kruth, M. Leu, and T. Nakagawa, Progress in additive manufacturing and rapid prototyping, CIRP Ann, vol.47, pp.525-540, 1998.

J. Hoerber, J. Glasschroeder, M. Pfeffer, J. Schilp, M. Zaeh et al., Approaches for additive manufacturing of 3D electronic applications, Procedia CIRP, vol.17, pp.806-811, 2014.

K. B. Perez and C. B. Williams, Combining additive manufacturing and direct write for integrated electronics-A review, Proceedings of the 24th International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference, pp.962-979, 2013.

P. C. Joshi, R. R. Dehoff, C. E. Duty, W. H. Peter, R. D. Ott et al., Direct digital additive manufacturing technologies: Path towards hybrid integration, Proceedings of the 2012 Future of Instrumentation International Workshop, pp.1-4, 2012.

M. K. Thompson, G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell et al., Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints, CIRP Ann, vol.65, pp.737-760, 2016.

E. Macdonald, R. Salas, D. Espalin, M. Perez, E. Aguilera et al., 3D printing for the rapid prototyping of structural electronics, IEEE Access, vol.2, pp.234-242, 2014.

P. Kulkarni, A. Marsan, and D. Dutta, A review of process planning techniques in layered manufacturing, Rapid Prototyp. J, vol.6, pp.18-35, 2000.

S. Sundaram, Z. Jiang, P. Sitthi-amorn, D. S. Kim, M. A. Baldo et al., 3D-Printed Autonomous Sensory Composites, Adv. Mater. Technol, 2017.

M. Smith, Y. S. Choi, C. Boughey, and S. Kar-narayan, Controlling and assessing the quality of aerosol jet printed features for large area and flexible electronics, Flex. Print. Electron, 2017.

T. Seifert, E. Sowade, F. Roscher, M. Wiemer, T. Gessner et al., Additive manufacturing technologies compared: morphology of deposits of silver ink using inkjet and aerosol jet printing, Ind. Eng. Chem. Res, vol.54, pp.769-779, 2015.

J. A. Paulsen, M. Renn, K. Christenson, and R. Plourde, Printing conformal electronics on 3D structures with Aerosol Jet technology, Proceedings of the 2012 Future of Instrumentation International Workshop, pp.1-4, 2012.

G. A. Salvatore, N. Münzenrieder, T. Kinkeldei, L. Petti, C. Zysset et al., Wafer-scale design of lightweight and transparent electronics that wraps around hairs, Nat. Commun, 2014.

R. Feiner, L. Engel, S. Fleischer, M. Malki, I. Gal et al., Engineered hybrid cardiac patches with multifunctional electronics for online monitoring and regulation of tissue function, Nat. Mater, vol.15, 2016.

K. Fukuda, Y. Takeda, Y. Yoshimura, R. Shiwaku, L. T. Tran et al., Fully-printed high-performance organic thin-film transistors and circuitry on one-micron-thick polymer films, Nat. Commun, vol.5, p.4147, 2014.

T. Baëtens, E. Pallecchi, V. Thomy, and S. Arscott, Cracking effects in squashable and stretchable thin metal films on PDMS for flexible microsystems and electronics, Sci. Rep, vol.8, p.9492, 2018.

M. Vosgueritchian, J. B. Tok, .. Bao, and Z. , Light-emitting electronic skin: Stretchable LEDs, Nat. Photonics, vol.7, pp.769-771, 2013.

R. Rogel, B. L. Borgne, T. Mohammed-brahim, E. Jacques, and M. Harnois, Spontaneous Buckling of Multiaxially Flexible and Stretchable Interconnects Using PDMS/Fibrous Composite Substrates, Adv. Mater. Interfaces, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01553056

A. Stier, E. Halekote, A. Mark, S. Qiao, S. Yang et al., Stretchable Tattoo-Like Heater with On-Site Temperature Feedback Control. Micromachines, vol.9, 2018.

Y. Wang, Y. Qiu, S. K. Ameri, H. Jang, Z. Dai et al., Low-cost, µm-thick, tape-free electronic tattoo sensors with minimized motion and sweat artifacts, NPJ Flex. Electron, vol.2, issue.6, 2018.

D. Kim, N. Lu, R. Ma, Y. Kim, R. Kim et al., Science, vol.333, pp.838-843, 2011.

W. Yeo, Y. Kim, J. Lee, A. Ameen, L. Shi et al., Multifunctional epidermal electronics printed directly onto the skin, Adv. Mater, vol.25, pp.2773-2778, 2013.

S. Lee, B. J. Kim, H. Jang, S. C. Yoon, C. Lee et al., Stretchable graphene transistors with printed dielectrics and gate electrodes, Nano Lett, vol.11, pp.4642-4646, 2011.

L. Borgne, B. De-sagazan, O. Crand, S. Jacques, E. Harnois et al., Conformal Electronics Wrapped Around Daily Life Objects Using an Original Method: Water Transfer Printing, ACS Appl. Mater. Interfaces, vol.9, pp.29424-29429, 2017.

G. Saada, M. Layani, A. Chernevousky, and S. Magdassi, Hydroprinting Conductive Patterns onto 3D Structures, Adv. Mater. Technol, 2017.

M. Robin, W. Kuai, M. Amela-cortes, S. Cordier, Y. Molard et al., Epoxy based ink as versatile material for inkjet-printed devices, ACS Appl. Mater. Interfaces, vol.7, pp.21975-21984, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01205444

S. J. Moon, M. Robin, K. Wenlin, M. Yann, B. S. Bae et al., Morphological impact of insulator on inkjet-printed transistor
URL : https://hal.archives-ouvertes.fr/hal-01622463

Z. Tao, B. Le-borgne, T. Mohammed-brahim, E. Jacques, and M. Harnois, Spreading and drying impact on printed pattern accuracy due to phase separation of a colloidal ink, Colloid Polym. Sci, vol.2018, pp.1-10
URL : https://hal.archives-ouvertes.fr/hal-01894675

D. Kim, J. Viventi, J. J. Amsden, J. Xiao, L. Vigeland et al., Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics, Nat. Mater, vol.9, pp.511-517, 2010.

Y. Zhang, C. Yin, C. Zheng, and K. Zhou, Computational hydrographic printing, ACM Trans. Graph. TOG, vol.34, p.131, 2015.