, Nanosatellite & cubesat database, 2017.

R. E. Hodges, N. Chahat, D. J. Hoppe, and J. D. Vacchione, A deployable high-gain antenna bound for Mars: Developing a new foldedpanel reflectarray for the first CubeSat mission to Mars, IEEE Antennas Propag. Mag, vol.59, issue.2, pp.39-49, 2017.

N. Chahat, R. E. Hodges, J. Sauder, M. Thomson, E. Peral et al., CubeSat deployable Ka-band mesh reflector antenna development for Earth science missions, IEEE Trans. Antennas Propag, vol.64, issue.6, pp.2083-2093, 2016.

C. J. Vourch and T. D. Drysdale, V-band "bull's eye" antenna for cubesat applications, IEEE Antennas Wireless Propag. Lett, vol.13, pp.1092-1095, 2014.

U. Beaskoetxea, S. Maci, M. Navarro-cía, and M. Beruete, 3-Dprinted 96 GHz bull's-eye antenna with off-axis beaming, IEEE Trans. Antennas Propag, vol.65, issue.1, pp.17-25, 2017.

B. Fong, J. Colburn, J. Ottusch, J. Visher, and D. Sievenpiper, Scalar and tensor holographic artificial impedance surfaces, IEEE Trans. Antennas Propag, vol.58, issue.10, pp.3212-3221, 2010.

A. M. Patel and A. Grbic, A printed leaky-wave antenna based on a sinusoidally-modulated reactance surface, IEEE Trans. Antennas Propag, vol.59, issue.6, pp.2087-2096, 2011.

G. Minatti, M. Faenzi, E. Martini, F. Caminita, P. D. Vita et al., Modulated metasurface antennas for space: Synthesis, analysis and realizations, IEEE Trans. Antennas Propag, vol.63, issue.4, pp.1288-1300, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02133518

S. Pandi, C. A. Balanis, and C. R. Birtcher, Design of scalar impedance holographic metasurfaces for antenna beam formation with desired polarization, IEEE Trans. Antennas Propag, vol.63, issue.7, pp.3016-3024, 2015.

G. Minatti, F. Caminita, E. Martini, M. Sabbadini, and S. Maci, Synthesis of modulated-metasurface antennas with amplitude, phase, and polarization control, IEEE Trans. Antennas Propag, vol.64, issue.9, pp.3907-3919, 2016.

D. González-ovejero, G. Minatti, G. Chattopadhyay, and S. Maci, Multibeam by metasurface antennas, IEEE Trans. Antennas Propag, vol.65, issue.6, pp.2923-2930, 2017.

G. Minatti, M. Faenzi, M. Mencagli, F. Caminita, D. Gonzálezovejero et al., Metasurface antennas, Aperture Antennas for Millimeter and Sub-Millimeter Wave Applications, pp.289-333, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02121357

N. Chamberlain, J. Chen, P. Focardi, R. Hodges, R. Hughes et al., Juno microwave radiometer patch array antennas, Proc. IEEE Antennas Propag, pp.1-4, 2009.

N. Chahat, B. Cook, H. Lim, and P. Estabrook, All-metal dual frequency rhcp high gain antenna for a potential europa lander, IEEE Trans. Antennas Propag

D. González-ovejero, T. J. Reck, C. D. Jung-kubiak, M. Alonsodelpino, and G. Chattopadhyay, A class of silicon micromachined metasurface for the design of high-gain terahertz antennas, Proc. IEEE Antennas Propag, pp.1191-1192, 2016.

D. González-ovejero, C. Jung-kubiak, M. Alonso-delpino, T. Reck, and G. Chattopadhyay, Design, fabrication and testing of a modulated metasurface antenna at 300 GHz, Proc. 11th Eur. Conf. Antennas Propag. (EUCAP), pp.3416-3418, 2017.

F. Puggelli, G. Minatti, Y. Vardaxoglou, and S. Maci, Design of a modulated dielectric metasurface antenna, Loughborough Antennas Propag. Conf. (LAPC), pp.1-3, 2015.

S. Zhang, R. K. Arya, S. Pandey, Y. Vardaxoglou, W. Whittow et al., 3D-printed planar graded index lenses, IET Microw., Antennas Propag, vol.10, issue.13, pp.1411-1419, 2016.
DOI : 10.1049/iet-map.2016.0013

URL : https://dspace.lboro.ac.uk/dspace-jspui/bitstream/2134/22552/4/IET%203D%20Printed%20Lens_revision_ravi.pdf

A. W. Glisson, Electromagnetic scattering by arbitrarily shaped surfaces with impedance boundary condition, Radio Sci, vol.27, issue.6, pp.935-943, 1992.

E. Bleszynski, M. Bleszynski, and T. Jaroszewicz, Surface-integral equations for electromagnetic scattering from impenetrable and penetrable sheets, IEEE Antennas Propag. Mag, vol.35, issue.6, pp.14-25, 1993.

S. Tretyakov, Analytical modeling in applied electromagnetics. Norwood, MA: Artech House, 2003.

C. Holloway, E. F. Kuester, J. Gordon, J. O'hara, J. Booth et al., An overview of the theory and applications of metasurfaces: The two-dimensional equivalents of metamaterials, IEEE Antennas Propag. Mag, vol.54, issue.2, pp.10-35, 2012.

E. F. Kuester, M. Mohamed, M. Piket-may, and C. Holloway, Averaged transition conditions for electromagnetic fields at a metafilm, IEEE Trans. Antennas Propag, vol.51, issue.10, pp.2641-2651, 2003.

G. Minatti, E. Martini, and S. Maci, Efficiency of metasurface antennas, IEEE Trans. Antennas Propag, vol.65, issue.4, pp.1532-1541, 2017.

A. Cst, CST Microwave Studio, 2016.

M. Mencagli, C. D. Giovampaola, and S. Maci, A closed-form representation of isofrequency dispersion curve and group velocity for surface waves supported by anisotropic and spatially dispersive metasurfaces, IEEE Trans. Antennas Propag, vol.64, issue.6, pp.2319-2327, 2016.

H. Bilow, Guided waves on a planar tensor impedance surface, IEEE Trans. Antennas Propag, vol.51, issue.10, pp.2788-2792, 2003.

A. M. Patel and A. Grbic, Effective surface impedance of a printedcircuit tensor impedance surface (PCTIS), IEEE Trans. Microw. Theory Tech, vol.61, issue.4, pp.1403-1413, 2013.

, Jet Propulsion Laboratory, California Institute of Technology, 2014.

, 3D Systems Customer Innovation Center (CIC), 2017.

R. Brandt and G. Neuer, Electrical resistivity and thermal conductivity of pure aluminum and aluminum alloys up to and above the melting temperature, Int. J. Thermophys, vol.28, issue.5, pp.1429-1446, 2007.