S. Lee, Y. Chen, H. Sung-cheng, Y. Lin, J. Chang et al., Improved performance of amorphous Si thin-polishing process, Journal of Alloys and Compounds, vol.558, pp.95-98, 2013.

S. Sadewasser, M. P. Pedro, H. Salomé, and . Rodriguez-alvarez, Materials efficient deposition and heat management of CuInSe2 microconcentrator, Solar Energy Materials & Solar Cells, vol.159, pp.496-502, 2017.

T. Terasako, Y. Uno, T. Kariya, and S. Shirakata, Structural and optical properties of In-rich Cu-In-Se polycrystalline thin films prepared by chemical spray pyrolysis, Solar Energy materials and Solar Cells, vol.90, pp.262-275, 2006.

L. P. Deshmukh, R. V. Suryawanshi, E. U. Masumdar, and M. Sharon, Cu1-xInxSe2 thin films: Deposition by spray pyrolysis and characteristics, Solar Energy, vol.86, pp.1910-1919, 2012.

J. Shanza-rehan, . Moon, . Tae-gun, J. Kim, J. Gwak et al., Seung Kyu Ahn SeJin Ahn, Role of Na in solution-processed CuInSe2 (CISe) devices: A different story for improving efficiency, Nano Energy, vol.48, pp.401-412, 2018.

B. J. Babu, S. Velumani, A. Kassiba, R. Asomoza, J. A. Chavez-carvayar et al., Deposition and characterization of graded Cu(In1-xGax)Se2 thin films by spray pyrolysis, Materials Chemistry and Physics, vol.162, pp.59-68, 2015.

H. Liu, Z. Jin, J. Wang, J. Ao, and G. Li, Well-dispersed CuInSe2 nanoplates and nanoplatesink-coated thin films for photovoltaic application by a triethylene glycol based solution process, Materials Letters, vol.94, 2013.

S. Hamrouni and M. ,

S. Alkhalifah, M. F. Boujmil, and K. B. Saad, Preparation and characterization of CuInSe2 electro deposited thin films annealed in vacuum, Applied Surface Science, vol.292, p.236, 2014.

P. Reinhard, A. Chirila, P. Blosch, F. Pianezzi, S. Nishiwaki et al., Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules, IEEE J. Photovoltaics, vol.3, issue.1, pp.572-580, 2013.

K. Otte, L. Makhova, A. Braun, and I. Konovalov,

. Cu, Se2 thin-film solar cells for space application, Thin Solid Films, vol.511, issue.512, pp.613-622, 2006.

J. Sim, S. Lee, J. Kim, K. Jeong, H. Ahn et al., Efficiency enhancement of CIGS compound solar cell fabricated usinghomomorphic thin Cr2O3 diffusion barrier formed on stainless steelsubstrate, Applied Surface Science, vol.389, pp.645-650, 2016.

S. D. Lu, Z. B. Wang, and K. Lu, Enhanced chromizing kinetics of tool steel by means of surface mechanical attrition treatment, Materials Science and Engineering A, vol.527, pp.995-1002, 2010.

T. Eisenbarth, R. Caballero, C. Kaufmann, A. Eicke, and T. Unold, Influence of iron on defect concentrations and device performance for Cu(In,Ga)Se2 solar cells on stainless steel substrates, Progress in Photovoltaics : Research and Applications, vol.20, pp.568-574, 2012.

F. Pianezzi, A. Chiril?, P. Blösch, S. Seyrling, S. Buecheler et al.,

. Tiwari, Electronic properties of Cu(In,Ga)Se2 solar cells on stainless steel foils without diffusion barrier, vol.20, pp.253-259, 2012.

T. Hanabusa, K. Kusaka, and O. Sakata, Residual stress and thermal stress observation in thin copper films, Thin Solid Films, vol.459, pp.245-248, 2004.

F. Kessler and D. Rudmann, Technological aspects of flexible CIGS solar cells and modules, Solar Energy, vol.77, pp.685-695, 2004.

C. Y. Shi, Y. Sun, F. Y. Qing-he, J. C. Li, and . Zhao, Cu(In,Ga)Se2 solar cells on stainlesssteel substrates covered with ZnO diffusion barriers, Solar Energy Materials Solar Cells, vol.93, pp.654-656, 2009.

B. J. Mueller, A. Fotler, V. Haug, F. Hergert, S. Zweigart et al., Influence of Mo-N as diffusion barrier in Mo back contacts for, Cu(In,Ga)Se2 solar cells, Thin Solid Films, vol.612, pp.186-193, 2016.

K. Herz, A. Eicke, F. Kessler, R. Wachter, and M. Powalla, Diffusion barriers for CIGS solar cells on metallic substrates, Thin Solid Films, pp.392-397, 2003.

R. Wuerz, A. Eicke, M. Frankenfeld, F. Kessler, M. Powalla et al., Yazdani-Assl CIGS thin-film solar cells on steel substrates, Thin Solid Films, vol.517, pp.2415-2418, 2009.

D. Zhou, H. Zhu, X. Liang, C. Zhang, Z. Li et al., Sputtered molybdenum thin films and the application in CIGS solar cells, Applied Surface Science, vol.362, pp.202-209, 2016.

M. Omrani, M. Habibi, R. Amrollahi, and A. Khosravi, Improvement of corrosion and electrical conductivity of 316L stainless steel as bipolar plate by TiN nanoparticle implantation using plasma focus, International Journal of Hydrogen Energy, vol.37, p.14676, 2012.

S. Ashour, S. Alkuhaimi, H. Moutinho, R. Matson, and F. A. Elfotouh, Junction formation and characteristics of CdS/CulnSe2/metal Interfaces, Thin Solid Films, vol.226, pp.129-134, 1993.

A. Han, X. Wang, X. Liu, Y. Huang, F. Meng et al., S, Se)2 film by pretreated Mo back contact, Solar Energy, vol.162, pp.109-116, 2018.

Y. Lin, Y. Hsieh, C. Lai, and H. Hsu, Impact of Mo barrier layer on the formation of MoSe2 in Cu(In,Ga)Se2 solar cells, Journal of Alloys and Compounds, vol.661, pp.168-175, 2016.

M. Theelen, S. Harel, M. Verschurena, M. Tomassini, A. Hovestad et al., Zeman Influence of Mo/MoSe2 microstructure on the damp heat stability of the Cu(In,Ga)Se2 back contact molybdenum, Thin Solid Films, vol.612, pp.381-392, 2016.

J. Li, L. Gao, and J. Guo, Mechanical properties and electrical conductivity of TiN-Al2O3 nanocomposites, Journal of the European Ceramic Society, vol.23, pp.69-74, 2003.

M. Omrani, M. Habibi, M. M. Saeed, and . Birjandi, Enhanced electrical conductivity of two layers AlN-TiN coating on SS316L as bipolar plate using plasma focus device, International Journal of Hydrogen Energy, vol.41, pp.5028-5036, 2016.

J. A. Oberus, Geological Survey, vol.202, p.202, 2017.

T. Terasako, S. Inoue, T. Kariya, and S. Shirakata, Three-stage growth of Cu-In-Se polycrystalline thin films by chemical spray pyrolysis, Solar Energy Materials & Solar Cells, vol.91, pp.1152-1159, 2007.

R. Yan, D. Gauthier, G. Flamant, and Y. Wang, Behavior of selenium in the combustion of coal or coke spiked with Se, Combustion and Flame, vol.138, pp.20-29, 2004.

B. J. Brown and C. W. Bates, Preparation and characterization similarities in the chemical mechanisms of CuInSe2 and CdS thin film formation by chemical spray pyrolysis, Thin Solid Films, vol.188, pp.301-305, 1990.

K. Vasua, M. Krishna, and K. A. Padmanabhan, Substrate-temperature dependent structure and composition variations in RF magnetron sputtered titanium nitride thin films, Applied Surface Science, vol.257, pp.3069-3074, 2011.

J. Hahn, G. Park, J. Lee, and J. Shim, Synthesis of CuInSe2 nanoparticles in an oleic acid solution for application in thin film solar cells, Journal of Industrial and Engineering Chemistry, vol.21, pp.754-759, 2015.

M. Ghali, M. Elnimr, .. F. Gh, B. Ali, and . Yousif, Colloidal CuInSe2 nanocrystals and thin films for low-cost photovoltaics, Optical Materials, vol.55, pp.145-152, 2016.

E. P. Zaretskaya, V. F. Gremenyuk, V. B. Zalesski, V. A. Ivanov, I. V. Viktorov et al., The properties of CuInSe2 films obtained by selenation of Cu-In layers, Technical Physics, vol.45, pp.1371-1373, 2000.

M. Saifullah, J. Gwak, J. Park, S. Ahn, K. Kim et al., Effect of substrate temperature during the three-stage process on the CuInSe2 solar cell characteristics, Current Applied Physics, vol.17, pp.1194-1201, 2017.

L. M. Mansfield, I. Repins, J. Pankow, M. Young, C. Dehart et al., Sodium-Doped Molybdenum Targets for Controllable Sodium Incorporation in CIGS Solar Cells, Proceedings of the 37th IEEE Photovoltaic Specialists Conference, 2011.

W. Ju-heon-yoon, J. Kim, Y. Park, and . Baik, Control of the preferred orientations of Cu(In,Ga)Se2 films and the photovoltaic conversion efficiency using a surface-functionalized molybdenum back contact, Progress in Photovoltaics : Research and Applications, 2012.

G. Ojeda-barrero, A. I. Oliva-avilés, A. I. Oliva, R. D. Maldonado, M. Acosta et al.,

. Medina, Effect of the substrate temperature on the physical properties of sprayed-CdS films by using an automatized perfume atomizer, Materials Science in Semiconductor Processing, vol.79, pp.7-13, 2018.

D. Agilan, . Mangalarajb, .. K. Sa, and G. Narayandassb, Mohan Raomm Effect of thickness and substrate temperature on structure and optical band gap of hot wall-deposited CuInSe2 polycrystalline thin films, Physica B, vol.365, pp.93-101, 2005.

W. Wang, Z. Jin, H. Liu, and H. Du, Preparation and characteristics of CuInSe2 thin films by dip-coating method using its nanocrystal ink, Materials Letters, vol.65, pp.2895-2898, 2011.

F. C. Borges, W. R. De-oliveira, and J. Kublitski, Mechanical, structural and tribological properties ef super-austenitic stainless steel submitted at solution heat treatement, pp.160-168, 2015.

H. Kou, X. Zhang, Y. Jiang, J. Li, S. Yu et al., Electrochemical atomic layer deposition of a CuInSe2 thin film on flexible multi-walled carbon nanotubes/polyimide nanocomposite membrane: Structural and photoelectrical characterizations, Electrochimica Acta, vol.56, pp.5575-5581, 2011.

X. Liang, H. Zhu, J. Chen, D. Zhou, C. Zhang et al., Substrate temperature optimization for Cu(In, Ga)Se2 solar cells on flexible stainless steels, vol.368, pp.464-469, 2016.

C. L. Bachir-eddine-messaid, R. Paven, F. Zair-talaighil, R. Marlec, L. L. Benzerga et al., Partial replacement in CISe solar cells of the molybdenum layer by an epitaxial Titanium Nitride thin film deposited onto MgO substrate, Mater. Res. Express, vol.5, p.106408, 2018.

J. Fu, Q. Nie, W. Qiu, J. Sun, F. Li et al., Crystallography and growth mechanism of TiN in Fe-17Cr stainless steel during solidification, Journal of Materials Processing Technology, vol.253, pp.43-50, 2018.

W. Xiao, H. Deng-shuliang, Y. Zou, D. Ren, M. Tang et al., Effect of roughness of substrate and sputtering power on the properties of TiN coatings deposited by magnetron sputtering for ATF, Journal of Nuclear Materials, vol.509, pp.542-549, 2018.