M. Luo, M. Y. Leng, X. S. Liu, J. Chen, C. Chen et al., Thermal evaporation and characterization of superstrate CdS/Sb2Se3 solar cells, Appl. Phys. Lett, vol.104, p.173904, 2014.

M. Luo, M. Y. Leng, X. S. Liu, J. Chen, C. Chen et al., Thermal evaporation and characterization of superstrate CdS/Sb 2 Se 3 solar cells, Appl. Phys. Lett, vol.104, 2014.

Y. Zhou, L. Wang, S. Y. Chen, S. K. Qin, X. S. Liu et al., Thin-film Sb 2 Se 3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries, Nat. Photonics, vol.9, pp.409-415, 2015.

X. Wen, C. Chen, S. C. Lu, K. H. Li, R. Kondrotas et al., Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency, Nat. Commun, vol.9, pp.1-10, 2018.

Z. Q. Li, X. Y. Liang, G. Li, H. X. Liu, H. Y. Zhang et al.,

, 2%-efficient core-shell structured antimony selenide nanorod array solar cells, Nat. Commun, vol.10, pp.1-9, 2019.

L. Wang, D. B. Li, K. H. Li, C. Chen, H. X. Deng et al., Stable 6%-efficient Sb 2 Se 3 solar cells with a ZnO buffer layer, Nat. Energy, vol.2, pp.1-9, 2017.

T. T. Ngo, S. Chavhan, I. Kosta, O. Miguel, H. J. Grande et al., Electrodeposition of Antimony Selenide Thin Films and Application in Semiconductor Sensitized Solar Cells, ACS Appl. Mater. Interfaces, vol.6, pp.2836-2841, 2014.

Y. Zhou, M. Y. Leng, Z. Xia, J. Zhong, H. B. Song et al., Solution-processed antimony selenide heterojunction solar cells, Adv. Energy Mater, vol.4, pp.1079-1083, 2014.

J. Cheng, R. Hu, K. Wang, X. Meng, Y. Li et al., Air Stable Solar Cells with 0.7 V Open Circuit Voltage Using Selenized Antimony Sulfide Absorbers Prepared by Hydrazine Free Solution Method

W. H. Wang, X. M. Wang, G. L. Chen, B. W. Chen, H. L. Cai et al., Promising Sb 2 (S, Se) 3 solar cells with high open voltage by application of a TiO 2 /CdS double buffer layer, Sol, vol.2, 2018.

H. Guo, Z. W. Chen, X. Wang, Q. F. Cang, X. G. Jia et al., Enhancement in the Efficiency of Sb 2 Se 3 Thin-Film Solar Cells by Increasing Carrier Concentration and Inducing Columnar Growth of the Grains

X. B. Hu, J. H. Tao, S. M. Chen, J. J. Xue, G. E. Weng et al., Improving the efficiency of Sb 2 Se 3 thin-film solar cells by post annealing treatment in vacuum condition, Sol. Energy Mater. Sol. Cells, vol.187, pp.170-175, 2018.

J. H. Tao, X. B. Hu, Y. X. Guo, J. Hong, K. H. Li et al., Solution-processed SnO 2 interfacial layer for highly efficient Sb 2 Se 3 thin film solar cells, Nano Energy, vol.60, pp.802-809, 2019.

X. B. Hu, J. H. Tao, G. E. Weng, J. C. Jiang, S. Q. Chen et al., Investigation of electrically-active defects in Sb 2 Se 3 thin-film solar cells with up to 5.91% efficiency via admittance spectroscopy, Sol. Energy Mater. Sol. Cells, vol.186, pp.324-329, 2018.

K. Shen, C. Z. Ou, T. L. Huang, H. B. Zhu, J. J. Li et al., Mechanisms and modification of nonlinear shunt leakage in Sb 2 Se 3 thin film solar cells, Sol. Energy Mater. Sol. Cells, vol.186, pp.58-65, 2018.

C. H. Gao, J. L. Huang, H. X. Li, K. W. Sun, Y. Q. Lai et al., Fabrication of Sb 2 S 3 thin films by sputtering and post-annealing for solar cells, Ceram. Int, vol.45, pp.3044-3051, 2019.

G. X. Liang, Z. H. Zheng, P. Fan, J. T. Luo, J. G. Hu et al., Thermally induced structural evolution and performance of Sb 2 Se 3 films and nanorods prepared by an easy sputtering method, Sol. Energy Mater. Sol. Cells, vol.174, pp.263-270, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01619420

S. Chen, Z. H. Zheng, M. Cathelinaud, L. H. Ma, X. S. Qiao et al., Magnetron sputtered Sb 2 Se 3 -based thin films towards high performance quasi-homojunction thin film solar cells, Sol. Energy Mater. Sol. Cells, vol.203, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02310252

G. X. Liang, X. H. Zhang, L. H. Ma, J. G. Hu, B. Fan et al., Facile preparation and enhanced photoelectrical performance of Sb 2 Se 3 nano-rods by magnetron sputtering deposition, Sol. Energy Mater. Sol. Cells, vol.160, pp.257-262, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01438108

Y. D. Luo, R. Tang, S. Chen, J. G. Hu, Y. K. Liu et al., An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb 2 Se 3 thin film solar cells, Chem. Eng. J, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02536592

J. H. Shi, Z. Q. Li, D. W. Zhang, Q. Q. Liu, Z. Sun et al., Fabrication of Cu (In, Ga) Se 2 thin films by sputtering from a single quaternary chalcogenide target, Prog. Photovolt. Res. Appl, vol.19, pp.160-164, 2011.

C. Yan, J. L. Huang, K. W. Sun, S. Johnston, Y. F. Zhang et al., Cu 2 ZnSnS 4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment, Nat, vol.3, pp.764-772, 2018.

R. Tang, Z. H. Zheng, Z. H. Su, X. J. Li, Y. D. Wei et al., Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb 2 Se 3 thin film, Nano Energy, vol.64, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02281773

C. Roger, S. Noel, O. Sicardy, P. Faucherand, L. Grenet et al., Se 2 solar cells on Ti foils, Characteristics of molybdenum bilayer back contacts for Cu, vol.548, pp.608-616, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01597141

C. Malerba, M. Valentini, C. L. Ricardo, A. Rinaldi, E. Carpelletto et al., Blistering in Cu 2 ZnSnS 4 thin films: Correlation with residual stresses, Mater. Des, vol.108, pp.725-735, 2016.

S. F. Wang, H. C. Yang, C. F. Liu, and H. Y. Bor, Characteristics of bilayer molybdenum films deposited using RF sputtering for back contact of thin film solar cells, Adv. Mater. Sci. Eng, 2014.

K. H. Li, C. Chen, S. C. Lu, C. Wang, S. Y. Wang et al., Orientation Engineering in Low-Dimensional Crystal-Structural Materials via Seed Screening, Adv. Mater, vol.31, 2019.

, This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, © 2020 by the authors. Licensee MDPI