A. Perrot, Printing of Concrete: State of the Art and Challenges of the Digital Construction Revolution, 2019.

T. Wangler, E. Lloret, L. Reiter, N. Hack, F. Gramazio et al., Digital Concrete: Opportunities and Challenges. RILEM Tech. Lett, vol.1, pp.67-75, 2016.

Y. W. Tay, B. Panda, S. C. Paul, N. A. Noor-mohamed, M. J. Tan et al., 3D printing trends in building and construction industry: a review. Virtual Phys. Prototyp, vol.12, pp.261-276, 2017.

D. Schutter, G. Lesage, K. Mechtcherine, V. Nerella, V. N. Habert et al., Vision of 3D printing with concrete-technical, economic and environmental potentials, SI Digit. Concr, vol.112, pp.25-36, 2018.

T. Wangler, N. Roussel, F. P. Bos, T. A. Salet, and R. J. Flatt, Digital concrete: a review, Cem. Concr. Res, vol.123, p.105780, 2019.

A. Perrot, D. Rangeard, and A. Pierre, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct, vol.49, pp.1213-1220, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01166504

N. Roussel, Rheological requirements for printable concretes, Cem. Concr. Res, vol.112, pp.76-85, 2018.

R. J. Wolfs, F. P. Bos, and T. A. Salet, Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing, Cem. Concr. Res, vol.106, pp.103-116, 2018.

D. Asprone, F. Auricchio, C. Menna, and V. Mercuri, 3D printing of reinforced concrete elements: Technology and design approach, Constr. Build. Mater, vol.165, pp.218-231, 2018.

D. Asprone, C. Menna, F. P. Bos, T. A. Salet, J. Mata-falcón et al., Rethinking reinforcement for digital fabrication with concrete, Cem. Concr. Res, vol.112, pp.111-121, 2018.

J. G. Sanjayan, B. Nematollahi, M. Xia, and T. Marchment, Effect of surface moisture on inter-layer strength of 3D printed concrete, Constr. Build. Mater, vol.172, pp.468-475, 2018.

H. Ogura, V. N. Nerella, and V. Mechtcherine, Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing, Materials, vol.11, p.1375, 2018.

G. Ma, Z. Li, L. Wang, F. Wang, and J. Sanjayan, Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing, Constr. Build. Mater, vol.202, pp.770-783, 2019.

B. Panda, S. C. Paul, and M. J. Tan, Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material, Mater. Lett, vol.209, pp.146-149, 2017.

H. Lee, J. J. Kim, .. Moon, J. Kim, W. Seo et al., Evaluation of the Mechanical Properties of a 3D-Printed Mortar, Materials, vol.12, p.4104, 2019.

M. Sonebi, S. Amziane, and A. Perrot, Mechanical Behavior of 3D Printed Cement Materials, 3D Print. Concr, pp.101-124, 2019.

M. Motamedi, R. Oval, P. Carneau, and O. Baverel, Supportless 3D Printing of Shells: Adaptation of Ancient Vaulting Techniques to Digital Fabrication, Design Modelling Symposium Berlin, pp.714-726, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02119439

G. Vantyghem, V. Boel, W. Corte, M. Steeman, and . Compliance, Stress-Based and Multi-physics Topology Optimization for 3D-Printed Concrete Structures, RILEM Bookseries, pp.323-332, 2019.

G. Vantyghem, W. Corte, E. Shakour, and O. Amir, 3D printing of a post-tensioned concrete girder designed by topology optimization, Autom. Constr, vol.112, p.103084, 2020.

I. Agustí-juan, F. Müller, N. Hack, T. Wangler, and G. Habert, Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall, J. Clean, vol.154, pp.330-340, 2017.

I. Agustí-juan and G. Habert, Environmental design guidelines for digital fabrication, J. Clean, vol.142, pp.2780-2791, 2017.

F. Bos, R. Wolfs, Z. Ahmed, and T. Salet, Large scale testing of digitally fabricated concrete (DFC) elements, Proceedings of the RILEM International Conference on Concrete and Digital Fabrication, pp.129-147, 2018.

V. Mechtcherine, J. Grafe, V. N. Nerella, E. Spaniol, M. Hertel et al., 3D-printed steel reinforcement for digital concrete construction-Manufacture, mechanical properties and bond behaviour, Constr. Build. Mater, vol.179, pp.125-137, 2018.

I. Farina, F. Fabbrocino, G. Carpentieri, M. Modano, A. Amendola et al., On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers, Compos. Part B Eng, vol.90, pp.76-85, 2016.

V. Mechtcherine, V. N. Nerella, H. Ogura, J. Grafe, E. Spaniol et al., Alternative Reinforcements for Digital Concrete Construction, Proceedings of the RILEM International Conference on Concrete and Digital Fabrication, pp.167-175, 2018.

M. Rubio, M. Sonebi, and S. Amziane, Fresh and rheological properties of 3D printing bio-cement-based materials, Proceedings of the 2nd ICBBM (PRO 119), pp.491-499, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01576188

M. Hambach, M. Rutzen, and D. Volkmer, Chapter 5-Properties of 3D-Printed Fiber-Reinforced Portland Cement Paste, 3D Concrete Printing Technology

J. G. Sanjayan, A. Nazari, and B. Nematollahi, , pp.73-113, 2019.

M. Hambach and D. Volkmer, Properties of 3D-printed fiber-reinforced Portland cement paste, Cem. Concr. Compos, vol.79, pp.62-70, 2017.

F. P. Bos, Z. Y. Ahmed, E. R. Jutinov, and T. A. Salet, Experimental exploration of metal cable as reinforcement in 3D printed concrete, Materials, vol.10, p.1314, 2017.

V. N. Nerella, S. Hempel, and V. Mechtcherine, Micro-and macroscopic investigations of the interface between layers on the interface of 3D-printed cementitious, Proceedings of the International Conference on Advances in Construction Materials and Systems, pp.3-8, 2017.

J. Van-der-putten, M. Deprez, V. Cnudde, G. De-schutter, and K. Van-tittelboom, Microstructural Characterization of 3D Printed Cementitious Materials, Materials, vol.12, p.2993, 2019.

J. Van-der-putten, G. De-schutter, and K. Van-tittelboom, Surface modification as a technique to improve interlayer bonding strength in 3D printed cementitious materials, RILEM Tech. Lett, vol.4, pp.33-38, 2019.

A. Perrot, T. Lecompte, P. Estellé, and S. Amziane, Structural build-up of rigid fiber reinforced cement-based materials, Mater. Struct, vol.46, pp.1561-1568, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00770565

D. Lootens, P. Jousset, L. Martinie, N. Roussel, and R. J. Flatt, Yield stress during setting of cement pastes from penetration tests, Cem. Concr. Res, vol.39, pp.401-408, 2009.

A. García, D. Castro-fresno, and J. A. Polanco, Evolution of penetration resistance in fresh concrete, Cem. Concr. Res, vol.38, pp.649-659, 2008.

H. Sleiman, A. Perrot, and S. Amziane, A new look at the measurement of cementitious paste setting by Vicat test, Cem. Concr. Res, vol.40, pp.681-686, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00494125

B. Mazhoud, A. Perrot, V. Picandet, D. Rangeard, and E. Courteille, Underwater 3D printing of cement-based mortar, Constr. Build. Mater, vol.214, pp.458-467, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02122198

N. Roussel, A thixotropy model for fresh fluid concretes: Theory, validation and applications, Cem. Concr. Res, vol.36, pp.1797-1806, 2006.

N. Roussel, G. Ovarlez, S. Garrault, and C. Brumaud, The origins of thixotropy of fresh cement pastes, Cem. Concr. Res, vol.42, pp.148-157, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00705595

T. Lecompte and A. Perrot, Non-linear modeling of yield stress increase due to SCC structural build-up at rest, Cem. Concr. Res, vol.92, pp.92-97, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02008163

A. Perrot, A. Pierre, S. Vitaloni, and V. Picandet, Prediction of lateral form pressure exerted by concrete at low casting rates, Mater. Struct, vol.48, pp.2315-2322, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01115611

S. Ma, Y. Qian, and S. Kawashima, Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures, Cem. Concr. Res, vol.108, pp.1-9, 2018.

J. Kruger, S. Zeranka, and G. Van-zijl, 3D concrete printing: a lower bound analytical model for buildability performance quantification, Autom. Constr, vol.106, p.102904, 2019.

V. Mechtcherine, F. P. Bos, A. Perrot, W. R. Da-silva, V. N. Nerella et al., Extrusion-based additive manufacturing with cement-based materials-Production steps, processes, and their underlying physics: A review, Cem. Concr. Res, vol.132, p.106037, 2020.

L. Martinie, P. Rossi, and N. Roussel, Rheology of fiber reinforced cementitious materials: classification and prediction, Cem. Concr. Res, vol.40, pp.226-234, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01872804

L. K. Mettler, F. K. Wittel, R. J. Flatt, and H. J. Herrmann, Evolution of strength and failure of SCC during early hydration, Cem. Concr. Res, vol.89, pp.288-296, 2016.