J. Wardenier, J. A. Packer, X. L. Zhao, and G. J. , Van der Vegte, Hollow Sections in Structural Applications, 2010.

J. Wardenier, Y. Kurobane, J. A. Packer, G. J. Van-der-vegte, and X. Zhao, Design guide for circular hollow section (CHS) joints under predominantly static loading, CIDECT Design Guide 1, 2008.

O. S. Bursi, Prefabricated composite beam-to-column filled tube or partially reinforced-concrete encased column connections for severe seismic and fire loadings, 2009.

J. F. Demonceau, V. L. Hoang, and J. P. Jaspart, Performance-based Approaches for High Strength Tubular Columns and Connections under Earthquake and Fire Loadings, Final Report, 2013.

. Blm-group, One Tube Technology No: 20. Inspired Tube, 2015.

J. Wardenier, Semi-rigid connections between I-beams and tubular columns, Final Report, 1995.

J. Rondal, K. G. Würker, D. Dutta, J. Wardenier, and N. Yeomans, Structural stability of hollow sections, CIDECT Design Guide 2, 1992.

D. Dutta, J. Wardenier, N. Yeomans, K. Sakae, O. Bucak et al., Design guide for fabrication, assembly and erection of hollow section structures, CIDECT Design Guide, vol.7, 1998.

Y. Kurobane, J. A. Packer, J. Wardenier, and N. Yeomans, Design Guide for Structural Hollow Section Column Connections, CIDECT Design Guide 9, 2004.

J. A. Packer, D. R. Sherman, and M. Lecce, Hollow Structural Section Connections, Steel Design Guide 24, Steel Design Guide Ser, 2010.

J. P. Jaspart and K. Weynand, Design of hollow section joints using the component method, Proc. 15th Int. Symp. Tubul. Struct (ISTS), pp.405-410, 2015.

J. P. Jaspart, C. Pietrapertosa, K. Weynand, E. Busse, R. Klinkhammer et al., Development of a full consistent design approach for bolted and welded joints in building frames and trusses between steel members made of hollow and/or open sections -application of the component method volume 1 -practical guidelines, CIDECT Report, 2005.

Y. M. Alostaz and S. P. Schneider, Connections to concrete-filled steel tubes, A Report on Research Sponsored by the NATIONAL SCIENCE FOUNDATION NSF CMS, pp.93-00682

T. Fukumoto and K. Morita, Elastoplastic behavior of panel zone in steel beam-to-concrete filled steel tube column moment connections, ASCE Journal of Structural Engineering, vol.131, pp.1841-1853, 2005.

I. Nishiyama, T. Fujimoto, T. Fukumoto, and K. Yoshioka, Inelastic force-deformation response of joint shear panels in beam-column moment connections to concrete-filled tubes, ASCE Journal of Structural Engineering, vol.130, pp.244-252, 2004.

S. Morino and K. Tsuda, Design and construction of concrete-filled steel tube column system in Japan, Earthquake Engineering and Engineering Seismology, vol.4, pp.51-73, 2002.

T. Fujimoto, E. Inai, M. Kai, K. Mori, O. Mori et al., Behavior of beam-to-column connection of Cft column system, pp.1-8, 2000.

Y. M. Alostaz and S. P. Schneider, Analytical behavior of connections to concrete-filled steel tubes, Journal of Constructional Steel research, vol.40, pp.95-127, 1996.

N. Kosteski and J. A. Packer, Experimental examination of branch plate-to-RHS member connection types, Proceedings of 9 th International Symposium of Tubular Structures, pp.135-144

N. Kosteski and J. A. Packer, Longitudinal plate and through plate-to-hollow structural section welded connections, ASCE Journal of Structural Engineering, vol.129, issue.4, pp.478-486

N. Kosteski, Branch plate to rectangular hollow section connections, 2001.

S. Willibald, J. A. Packer, A. P. Voth, and X. Zhao, Through plate joints to elliptical and circular hollow sections, Proceedings of the 11 th International Symposium on Tubular Structures, pp.221-228

X. Zhao, Branch plate connections to elliptical hollow sections

S. R. Mirghaderi, S. Torabian, and F. Keshavarzi, I-beam to box-column connection by a vertical plate passing through the column, Engineering Structures, vol.32, pp.2034-2048, 2010.

A. P. Voth and J. A. Packer, Branch Plate-to-Circular Hollow Structural Section Connections. I: Experimental Investigation and Finite-element Modeling, ASCE Journal of Structural Engineering, vol.138, issue.8, pp.1007-1018, 2012.

A. P. Voth, Branch Plate-to-Circular Hollow Structural Section Connections, 2010.

V. L. Hoang, J. F. Demonceau, and J. P. Jaspart, Resistance of through-plate component in beam-to-column joints with circular hollow columns, Journal of Constructional Steel Research, vol.92, pp.79-89, 2014.

A. Kanyilmaz, The problematic nature of steel hollow section joint fabrication, and a remedy using laser cutting technology: A review of research, applications, opportunities, Engineering Structures, vol.183, pp.1027-1048, 2019.

R. Moazed and R. Fotouhi, The influence of mechanical and laser cutting on the fatigue strengths of square hollow-section welded T-joints, Journal of Offshore Mechanics and Arctic Engineering, vol.134, issue.3, p.2012

A. Kanyilmaz and C. A. Castiglioni, Fabrication of laser cut I-beam-to-CHS-column steel joints with minimized welding, Journal of Constructional Steel Research, vol.146, pp.16-32, 2018.

C. A. Castiglioni, A. Kanyilmaz, W. Salvatore, F. Morelli, A. Piscini et al., Laser Technology for Innovative Joints in Steel Construction), 2016.

, Design of Steel Structures -Part 1-5: Plated Structural Elements. EN1993-1-5, vol.3, 2006.

, Design of Steel Structures -Part 1-1: General Rules and Rules for Buildings. EN1993-1-1, European Committee for Standardization, vol.3, 2005.

, Design of steel structures -Part 1-8: Design of joints. EN1993-1-8, European Committee for Standardization, vol.3, 2005.

, Final Document of prEN 1993-1-8. European Committee for Standardization, Eurocode 3: Design of steel structures -Part 1-8: Design of joints, 2018.

J. Wardenier, Hollow Sections in Structural Applications, 2001.

, DIANA User's Manual, DIANA Release 10, vol.2, 2018.

, DIANA User's Manual, Element Library, 2014.

M. Couchaux, V. Vyhlas, and M. Hjiaj, RFCS Project LASTEICON Test Report: Tests on Joints C3 and C4, 2019.